Electriq Global ($8 million to develop solid hydrogen carrier technologies for hydrogen storage and transport)

Electriq Global, an Israel hydrogen energy startup founded in 2014, develops a technology that transforms hydrogen gas into a powdery form, which simplifies the storage, transport, and use of hydrogen. This technology addresses the challenges associated with traditional hydrogen storage methods, such as the need for complex infrastructure and safety measures due to the high pressure and low energy density of compressed or liquefied hydrogen.

Challenges: hydrogen storage

As we move toward a cleaner energy future, hydrogen’s versatility and sustainability make it an increasingly attractive option. This clean energy carrier offers several advantages, including the potential for production from renewable resources, zero-emission combustion, and high energy density. Applications for this highly portable energy source range from generating electricity through fuel cells to producing heat through combustion, all while minimizing greenhouse gas emissions. Its flexibility and eco-friendly nature position hydrogen as a key player in the evolving energy landscape.

Traditionally, the world has relied heavily on steam methane reforming (SMR) to produce over 60 million tons of hydrogen annually. However, this method comes with a significant environmental cost. It’s an energy-intensive process that contributes approximately 2% to global carbon dioxide (CO₂) emissions, releasing between 5 and 9 tons of CO₂ for every ton of hydrogen it generates.

There are cleaner paths to producing hydrogen, such as water electrolysis and methane pyrolysis.

After production, transporting hydrogen to end users is essential. However, this process is challenging due to hydrogen’s unique chemical and physical properties. Safety concerns arise from hydrogen’s potential to cause material embrittlement and its propensity to escape from containment. Additionally, hydrogen’s wide flammability range and low ignition energy present significant risks. These factors pose substantial challenges to the widespread and safe adoption of hydrogen as an energy carrier.

Several solutions have been developed for hydrogen transportation, each with its own set of limitations:

  • High-pressure/compressed hydrogen

This method utilizes bulk storage vehicles like tube trailers. However, it faces constraints in transport volume and experiences hydrogen losses, reducing efficiency over long distances. Compressed hydrogen storage and transportation can consume up to 20% of the fuel’s energy content.

  • Liquid cryogenic hydrogen

This approach is favored for high-volume transport, especially in the absence of pipelines. The process involves cooling hydrogen to below 20K through liquefaction and transporting it in liquid tankers with onboard cooling systems. While effective for large volumes, this method is energy-intensive, potentially using up to 40% of the hydrogen’s energy content.

  • Adsorption materials

Metal hydrides, which are formed by the chemical reaction of metals and hydrogen gas, provide a highly compact method of storing hydrogen. They are denser than liquid hydrogen and can be stored at normal temperatures and pressures. However, metal hydrides have a relatively low hydrogen storage capacity, ranging from 1-5% by weight. Furthermore, metal hydrides are unsuitable for flow-based transportation methods like pipelines. Metal hydrides are primarily used in stationary applications due to their high energy demand and slow kinetics associated with hydrogen absorption and release.

  • Liquid Organic Hydrogen Carriers (LOHCs)

LOHCs are an innovative solution for hydrogen storage and transport. This technology involves hydrogenating an unsaturated organic compound, such as toluene, to form a hydrogen-rich liquid, like methylcyclohexane, which can be stored and transported under ambient conditions without the need for high pressures or low temperatures. When hydrogen is needed, methylcyclohexane undergoes dehydrogenation, releasing hydrogen for use. This process is facilitated by catalysts and can be integrated into existing fuel infrastructure, making LOHCs a practical and cost-effective alternative to traditional hydrogen storage methods.

Electriq Global Technology

Electriq Global employs solid hydrogen carriers in the form of potassium borohydride (KBHâ‚„) powder, which helps to further decrease the volume of hydrogen fuel. KBHâ‚„ offers a higher gravimetric capacity than metal hydrides and a greater volumetric capacity than both compressed and liquefied hydrogen. The KBHâ‚„ powder is encapsulated, streamlining the shipping and distribution process for hydrogen fuel.

The KBHâ‚„ capsule is delivered to a location where hydrogen is needed, and there, the KBHâ‚„ powder is combined with water to create a liquid hydrogen carrier. In a dehydrogenation reactor, KBHâ‚„ breaks down into hydrogen gas and the by-product potassium metaborate (KBOâ‚‚). The KBOâ‚‚ is then separated from the solution and transported to a hydrogen production site, where it reacts with hydrogen gas to regenerate the solid hydrogen carrier, KBHâ‚„ powder.

Electriq Global stores and releases hydrogen gas using potassium borohydride.

How Electriq Global releases hydrogen gas

The diagram below depicts Electriq Global’s dehydrogenation system that releases hydrogen gas from the solid hydrogen carrier of the KBH₄ capsule.

Electriq Global releases hydrogen gas from KBH4. (Ref. WO2023161942A3)
Electriq Global releases hydrogen gas from KBH4 (Ref. WO2023161942A3).

The system consists of a hydrogen storage tank, a mixing chamber, a dehydrogenation reactor, and a unit for extracting KBOâ‚‚ from the used solution.

The mixing chamber features a port designed to receive a hydrogen carrier capsule containing KBHâ‚„ powder. This port can open the capsule to introduce the KBHâ‚„ powder into the chamber. Additionally, the mixing chamber includes a water inlet for introducing deionized (DI) water, which is preferred due to its lack of metal ions. Metal ions could react with the catalyst in the dehydrogenation reactor, reducing the efficiency of hydrogen gas release.

Within the mixing chamber, the KBH₄ powder is combined with DI water to create a liquid hydrogen carrier solution, specifically a KBH₄ aqueous solution. The mixing ratio is 2.5 liters of water to 0.675 kg of KBH₄ powder, with the mixing temperature maintained between 40 and 90 ºC.

Typically, when KBHâ‚„ is mixed with water, an initial hydrolysis occurs spontaneously, releasing a small amount of hydrogen gas, which is then stored in a tank. Following this initial reaction, KBHâ‚„ remains quite stable in highly alkaline solutions, allowing the solution to be stored for extended periods without significant decomposition. To produce the desired amount of hydrogen gas, a catalyst is needed to lower the activation energy and facilitate the decomposition of KBHâ‚„. This process takes place in a dehydrogenation reactor.

The KBHâ‚„ aqueous solution from the mixing chamber is fed into the dehydrogenation reactor chamber. With the aid of a cobalt-based catalyst, 90% to 98% of the KBHâ‚„ decomposes into KBOâ‚‚, releasing hydrogen gas in the process. The released hydrogen gas is stored in the tank.

KBH₄ + 2 H₂O → KBO₂ + 4 H₂

The hydrolysis of KBHâ‚„ is an exothermic reaction. The heat generated in the dehydrogenation chamber can be utilized to warm the mixing chamber.

The cobalt-based catalysts, as referenced in EP3265422B1, are mounted on a movable platform. This design allows the catalyst to contact the KBH₄ solution when hydrogen gas release is desired. Conversely, when hydrogen gas release is not needed, the catalyst is retracted from the KBH₄ solution, halting the hydrolysis process. This setup prevents excessive hydrogen gas release and minimizes the amount of stored hydrogen gas, thereby reducing risks related to hydrogen’s flammability and storage conditions. Additionally, the catalyst can be periodically refreshed to maintain efficient hydrogen gas release.

The KBOâ‚‚ solution exits the dehydrogenation chamber, and the KBOâ‚‚ is extracted from the solution using appropriate methods, such as evaporation. Subsequent processing of the solid KBOâ‚‚ yields anhydrous KBOâ‚‚ powder. This powder is then transported to a hydrogen production site, where it is used to store hydrogen gas as a solid hydrogen carrier in the form of KBHâ‚„ powder.

How Electriq Global stores hydrogen gas

The diagram below illustrates a hydrogenation reactor that utilizes anhydrous KBOâ‚‚ powder to react with hydrogen gas, forming solid KBHâ‚„ as a hydrogen release carrier.

Electriq Global stores hydrogen gas in KBO2 (Ref. EP3265422B1).
Electriq Global stores hydrogen gas in KBO2 (Ref. EP3265422B1).

Anhydrous KBO₂ powder, with a particle size of approximately 30 µm, is combined with a dry Mg-based alloy powder (comprising 5% Ca and 95% Mg, also with a particle size of about 30 µm) to create a homogeneous mixture. The molar ratio of KBO₂ to Mg is 1:2. This mixture is placed in a hydrogenation reactor, which is then sealed. The reactor is purged with argon to remove air and subsequently heated to a temperature of 400 ºC.

Once the desired temperature is reached, the reactor is flushed with hydrogen gas. Hydrogen is introduced into the reactor at a pressure of 30 bar. The temperature is increased to 600 ºC and maintained for two hours, during which the hydrogenation reaction takes place.

KBO₂ + 2 Mg + 2 H₂ → KBH₄ + 2MgO

The reactor is then allowed to cool to room temperature, and the product mixture is collected. The conversion yield of KBOâ‚‚ to KBHâ‚„ is approximately 80%. The KBHâ‚„ powder is separated and sealed in capsules to serve as solid hydrogen carriers.

Electriq Global Patent

  • WO2023161942A3 System and method for release of hydrogen gas from liquid carrier
  • EP3265422B1 A method for catalytically induced hydrolysis and recycling of metal borohydride solutions
  • US20220293977A1 Replaceable modular device for hydrogen release
  • IL302674B2 Method and reactor for the production of alkali metal
  • IL303677B1 A method and system for recovery of alkali metal hydroxide and other chemicals from waste
  • WO2023214401A1 A catalyst for generating hydrogen and method of its production

Electriq Global Technology Applications

  • Off-grid power generation and power backup

Electriq’s technology is particularly suited for off-grid applications, providing a reliable power source where traditional grid access is unavailable. The hydrogen powder can be easily transported and used in remote locations to generate electricity on demand.

The technology is also ideal for backup power systems, such as those needed for hospitals, data centers, and other critical infrastructure. The hydrogen powder can be stored safely for long periods and used when needed.

  • Transportation and mobility

Electriq’s hydrogen powder is suitable for maritime use due to its safety and ease of transport. It can be used to power ships and other marine vessels, offering a zero-emission alternative to traditional fuels. The technology can be applied in heavy transport sectors, such as trucking and shipping, where hydrogen’s high energy density and zero emissions are beneficial.

  • Energy storage and strategic reserves

Electriq’s hydrogen powder can store excess renewable energy, such as from wind or solar, for later use. This capability helps balance supply and demand and supports grid stability. The powder’s long shelf life and stability make it suitable for building strategic energy reserves, ensuring energy security and reliability.

  • Industrial use

The pure hydrogen released from Electriq’s powder can be used in various industrial processes, serving as a clean energy source or raw material.

Electriq Global Products

  • Hydrogen powder plant in Amsterdam

Electriq is constructing the world’s first hydrogen powder manufacturing plant at Zenith Energy Terminals in the Port of Amsterdam. This project, supported by a €1.1 million grant from the Netherlands Enterprise Agency (RVO), is a pioneering effort in the field of hydrogen storage and aims to transform the port into a central hub for hydrogen carriers.

The plant will utilize green hydrogen produced with renewable energy, such as wind power, and is expected to commence operations in 2026. This initiative aligns with the Port of Amsterdam’s vision to handle 1 million tons of hydrogen by 2030 and supports the broader goal of creating a sustainable energy landscape in the Dutch and European markets.

Electriq Global Funding

Electriq Global has raised a total of $8.2M in funding over 3 rounds:

Their latest funding was raised on Feb 28, 2024 from a Grant round.

The funding types of Electriq Global.
The funding types of Electriq Global.
The cumulative raised funding of Electriq Global.
The cumulative raised funding of Electriq Global.

Electriq Global Investor

Electriq Global is funded by 3 investors:

The Climate Solutions Prize and Netherlands Enterprise Agency are the most recent investors.

The funding rounds by investors of Electriq Global.
The funding rounds by investors of Electriq Global.

Electriq Global Founder

Yaniv Duchovny and Tomer A. are Co-Founder.

Electriq Global CEO

Baruch Halpert is CEO.

Leave a Comment

Your email address will not be published. Required fields are marked *

six + 1 =

Scroll to Top